Operation
Controls and
Front Panel
Functions
1. POWER Button & LED:
Press this button to power on the device and the LED will illuminate in
green or set it to standby mode and the LED will illuminate in Red.
2.
IR Window:
Accept IR signal from the device’s remote control included in the package
only.
3.
CHANNEL IN 1~4:
Press these buttons to rotate SDI 1~4 input source on each channel to be
display on screens. All channels can select the same input or each channel
a different input.
4.
WINDOW A~H & LEDs:
Press these hot keys to select the screen setting where A~D are display a
full screen of each channel and E~H are a different combination of a full
screen setting with all 4 channels.
Windows A~D's channel input selection is corresponding to channel input
no. 1~4. That is, to change window A's input channel must press channel
input 1's button. Channel input 2~4's button will not activate under window
A's selection. Windows E~H's size are adjustable through the OSD menu
setting and only window G & H is PIP(Picture in Picture) where E & F are
POP (Picture out Of picture) settings.
Under window E~H when the size setting is overlapping one another,
channel display sequence is CH4>CH3>CH2 >CH1. That is, CH4 will cover
CH3 and CH3 will cover CH2 and so on. Under some display the borderline
may have interference, adjusting display's motion setting may resolve the
interference issue.
5.
FAV SELECT & LEDs:
Press this button to recall the favor setting from 1~4 and the LED will
illuminate accordingly.
6.
MENU:
Press this button to bring up the OSD menu on screen.
7.
ENTER:
Press this button to enter into MENU selection and confirm the selection.
8.
-/+ Buttons:
Press these buttons to scroll down/up the OSD selections.
9.
INFO:
Press this button to bring up the information section from the OSD menu.
10.
AUDIO:
