carriage return. Commands are case-insensitive. If the IP is changed
then the IP Address required for Telnet access will also change
accordingly.
WebGUI Control
On a PC/Laptop that is connected to an active network system, open a web
browser and type device’s IP address (default setting IP:192.168.1.50 ) on the
web address entry bar. The browser will display device’s Image Adjust, Output
Resolution, Window Setup, OSD Settings, Window Convert, Chromakey
Setup & Ethernet pages for users to control.
Image Adjust
Click on 'Image Adjust' to show current I/O information and Channel input
status. Set power status, select source settings and adjust each channel’s
contrast, brightness and saturation, or to set the setting back to default.
Output Resolution
Click on 'Output Resolution' to select both output ports’ resolution,
default setting is on Native and the device will reference output A’s
EDID
