21
SETTING UP
Recline Adjustment
The Trekker
TM
Seating Module comes standard with Back
Angle Adjustment of 80º - 100º in increments of 10º.
Optional Feature:
The Trekker
TM
Seating Module has an additional recline
option to extend the back angle adjustment to full recline
range of 80º to 170º.
FIG.35a + 35b
1. Make sure the caster wheels are locked.
FIG.12
2. Adjust the back to the desired recline angle by pulling
the strap on the back of the Seating Module.
FIG.36
3.
Confirm that the recline lock pins are fully engaged on
both sides.
FIG.36
19
OPERATIONS
Recline Degrees
80º- 170º
Pull recline cord to adjust
The Trekker comes standard with Back Angle Adjustment of 80
º
- 100
º
in increments of 10
º
.
Optional Feature:
The Trekker has an additional recline option to extend the back angle adjustment to full recline
range of 80
º
to 170
º
of recline adjustment.
1. Make sure wheel locks are engaged.
2. If user is in the chair, move the user’s back forward slowly and carefully to shift user’s weight.
3. Grab the pull strap on the center of the recline cord.
Fig. 57
4. With your free hand on the top of the back, and while holding the recline cord, adjust the back
to the desired recline angle and release the pull strap.
5. Confirm that the recline lock pins are fully engaged on both sides.
6. Replace user to relaxed position. Release wheel locks.
WARNING:
Engage the wheel locks prior to adjusting
recline angle.
WARNING:
Check to confirm that recline lock pins are
fully engaged prior to use.
WARNING:
Keep fingers free of recline mechanism.
WARNING:
Never allow the user’s head to tilt/recline
beyond the horizontal plane to the floor.
Fig. 58
80º
90º
100º
110º
120º
130º
140º
150º
160
º
170
º
!
!
Recline Adjustment
Fig. 58
!
Note:
Recline Angle can also be refered to as seat-
to-back angle or Back Angle Adjustment .
!
Fig. 57
Operations
FIG.35a
FIG.35b
FIG.36
WARNING: Lock caster wheels before adjusting recline angle.
WARNING: Check to confirm that recline lock pins are fully
engaged prior to use.
WARNING: Keep fingers free of recline mechanism.
WARNING: Never allow the user’s head to tilt/recline beyond
the horizontal plane to the floor.
Recline Lock Pins
Recline Degrees
Pull
