13
SETTING UP
The forces required to raise and lower the seating module with the user is dependent on the user’s
weight and the gas strut paired with the user (650N or 800N). Please see the weight assist chart for
optimal pull forces.
FIG.19
Frame Height Adjustment with User
650N
Gas Strut
800N
Gas Strut
User Weight
Pull F
or
ce (lbs)
50 lbs.
25 lbs.
10 lbs.
20 lbs.
30 lbs.
0
110 lbs.
75 lbs.
Select Your Assist Based on User’s Weight
Forces required to raise the user vary depending on your gas strut selection.
1. Lock all caster wheels.
FIG.12 (see page 11)
2. Unlock foot pedal lock.
FIG.10 (see page 11)
3. Press the foot pedal.
FIG.16
Place both
hands firmly on each side of the rear cross
tube of the seating module.
FIG.17
4. Simultaneous press down (lower) or pull up
(raising) the rear cross tube while pressing
on the foot pedal.
FIG.18
5. Once the desired height is reached, the foot
pedal should be released and locked to avoid
accidental actuation.
WARNING: Keep objects and obstructions away from the YoYo frame when raising, moving or lowering the frame.
WARNING: When moving an occupant in the YoYo frame, the seating module should be tilted to the maximum tilt
range of 30 degrees to ensure balance and stability of the frame.
WARNING: Before adjusting the seat to floor height of the YoYo frame, always check to ensure the foot pedal
security lock has been unlocked and the caster locks have been locked.
FIG.16
FIG.17
FIG.18
FIG.19
Rear
Cross
Tube
