Convaid YoYo User Manual Download Page 27

Page: 27 / 44

ACCESSORIES & OPTIONS

Foot Positioners

Adjustable foot positioners hold feet in position on the
foot support. The foot positioners may be crisscrossed
over the top of the foot to secure the entire
foot.

FIG.53

The foot positioners can also be converted to an
ankle strap. To convert into an ankle strap, remove
left buckle and secure the loose end of the strap.
Wrap the right strap around the ankle and fasten the
buckle.

FIG. 54-57

CONVAID USER’S GUIDE

Fig. 56

Fig. 55

Adjustable foot positioners hold feet in position on the

foot support. The foot positioners may be criss-

crossed over the top of the foot to secure the entire

foot.

Fig. 52

The foot positioners can also be converted to an

ankle strap. To convert into an ankle strap, remove

left buckle and secure the loose end of the strap.

Wrap the right strap around the ankle and fasten the

buckle.

Fig. 51 - 54

Fig. 52

Fig. 51 Remove buckle

Fig. 52 Secure loose end of strap

Foot Positioners

To attach the

positioners, thread the

strap through top of

foot support, and bolt

to underside of

foot support, using a

3/8” wrench and

Phillips screwdriver.

Fig. 55

Fig. 53

Fig. 54

CONVAID USER’S GUIDE

Fig. 56

Fig. 55

Adjustable foot positioners hold feet in position on the

foot support. The foot positioners may be criss-

crossed over the top of the foot to secure the entire

foot.

Fig. 52

The foot positioners can also be converted to an

ankle strap. To convert into an ankle strap, remove

left buckle and secure the loose end of the strap.

Wrap the right strap around the ankle and fasten the

buckle.

Fig. 51 - 54

Fig. 52

Fig. 51 Remove buckle

Fig. 52 Secure loose end of strap

Foot Positioners

To attach the

positioners, thread the

strap through top of

foot support, and bolt

to underside of

foot support, using a

3/8” wrench and

Phillips screwdriver.

Fig. 55

Fig. 53

Fig. 54

CONVAID USER’S GUIDE

Fig. 56

Fig. 55

Adjustable foot positioners hold feet in position on the

foot support. The foot positioners may be criss-

crossed over the top of the foot to secure the entire

foot.

Fig. 52

The foot positioners can also be converted to an

ankle strap. To convert into an ankle strap, remove

left buckle and secure the loose end of the strap.

Wrap the right strap around the ankle and fasten the

buckle.

Fig. 51 - 54

Fig. 52

Fig. 51 Remove buckle

Fig. 52 Secure loose end of strap

Foot Positioners

To attach the

positioners, thread the

strap through top of

foot support, and bolt

to underside of

foot support, using a

3/8” wrench and

Phillips screwdriver.

Fig. 55

Fig. 53

Fig. 54

CONVAID USER’S GUIDE

Fig. 56

Fig. 55

Adjustable foot positioners hold feet in position on the

foot support. The foot positioners may be criss-

crossed over the top of the foot to secure the entire

foot.

Fig. 52

The foot positioners can also be converted to an

ankle strap. To convert into an ankle strap, remove

left buckle and secure the loose end of the strap.

Wrap the right strap around the ankle and fasten the

buckle.

Fig. 51 - 54

Fig. 52

Fig. 51 Remove buckle

Fig. 52 Secure loose end of strap

Foot Positioners

To attach the

positioners, thread the

strap through top of

foot support, and bolt

to underside of

foot support, using a

3/8” wrench and

Phillips screwdriver.

Fig. 55

Fig. 53

Fig. 54

CONVAID USER’S GUIDE

Fig. 56

Fig. 55

Adjustable foot positioners hold feet in position on the

foot support. The foot positioners may be criss-

crossed over the top of the foot to secure the entire

foot.

Fig. 52

The foot positioners can also be converted to an

ankle strap. To convert into an ankle strap, remove

left buckle and secure the loose end of the strap.

Wrap the right strap around the ankle and fasten the

buckle.

Fig. 51 - 54

Fig. 52

Fig. 51 Remove buckle

Fig. 52 Secure loose end of strap

Foot Positioners

To attach the

positioners, thread the

strap through top of

foot support, and bolt

to underside of

foot support, using a

3/8” wrench and

Phillips screwdriver.

Fig. 55

Fig. 53

Fig. 54

CONVAID USER’S GUIDE

Fig. 56

Fig. 55

Adjustable foot positioners hold feet in position on the

foot support. The foot positioners may be criss-

crossed over the top of the foot to secure the entire

foot.

Fig. 52

The foot positioners can also be converted to an

ankle strap. To convert into an ankle strap, remove

left buckle and secure the loose end of the strap.

Wrap the right strap around the ankle and fasten the

buckle.

Fig. 51 - 54

Fig. 52

Fig. 51 Remove buckle

Fig. 52 Secure loose end of strap

Foot Positioners

To attach the

positioners, thread the

strap through top of

foot support, and bolt

to underside of

foot support, using a

3/8” wrench and

Phillips screwdriver.

Fig. 55

Fig. 53

Fig. 54

To attach the

positioners, thread

the strap through top

of foot support, and

bolt to underside of

foot support, using a

3/8” wrench and

Phillips screwdriver.

FIG. 58 & 59

FIG.53

FIG.54

FIG.55

FIG.56

FIG.57

FIG.58

FIG.59

Summary of Contents for YoYo













































Search results

Summary of Contents for YoYo

Reviews:

Related manuals for YoYo

Brands by name

Popular brands

Convaid YoYo, User Manual

Search results

Summary of Contents for YoYo

Reviews:

Related manuals for YoYo

Brands by name

Popular brands