Convaid Cruiser 10, Replacement Parts & Accessories Manual

Page: 12 / 53

INSTRUCTIONS
888-Convaid (266-8243)
www.convaid.com 18
19
Cruiser 10 Cruiser 10
Close-up
996012
QTY DESCRIPTION PART NUMBER ITEM
1 CX-10 Pivot Footplate Assy LH 504885 1
1 Footplate Adjustment Tube LH 500969 2
1 Footrest Extens. Housing Assy 500690 3
1 Tube Connector 7/8" Heavy Duty 100017
4
2 Screw 1/4"-20 x 1-1/2" Flat Skt 100262 5
1 Detent Pin With Webbing Assembly 503879 6
1 Thread Locker-Medium-Vibra-tite 100690 7
5 7
4
2
1
Cruiser 10-12 Small Angle Adjustable Footplate Assembly Kit LH
Assembled
Exploded
6
996012
QTY DESCRIPTION PART NUMBER ITEM
1 CX-10 Pivot Footplate Assy LH 504885 1
1 Footplate Adjustment Tube LH 500969 2
1 Footrest Extens. Housing Assy 500690 3
1 Tube Connector 7/8" Heavy Duty 100017 4
2 Screw 1/4"-20 x 1-1/2" Flat Skt 100262 5
1 Detent Pin With Webbing Assembly 503879 6
1 Thread Locker-Medium-Vibra-tite 100690 7
5 7
4
2
1
Cruiser 10-12 Small Angle Adjustable Footplate Assembly Kit LH
Assembled
Exploded
6
Angle Adjustable Swing Away Footplate Assy Kit - Left
Assembled
FOOTPLATE
Angle Adjustable Swing Away Footplate Assy Kit - Left
Item Description Qty
1 CX-10 Pivot Footplate Assembly, LH 1
2 Footplate Adjustment Tube, LH 1
3 Footrest Extension Housing Assembly 1
4 Tube Connector 7/8" Heavy Duty 1
5 Screw 1/4"-20 x 1-1/2" Flat Skt 2
6 Detent Pin With Webbing Assembly 1
7 Thread Locker-Medium-Vibra-tite 1
996012 #
Kit Includes
Angle Adjustable Swing Away Footplate Assy Kit - Left
3
1. Pull out metal pin and remove the existing footplate extension tube. Item 2
2. Using a 5/32" allen wrench, remove both bolts from the housing bracket on the frame
and remove existing footplate assembly components.
3. If needed, install tube connector Item 4 into the front leg by hammering or pressing it
into the front leg tube.
4. Slide the loop portion of the detent pin with webbing assembly over the front x-brace
tube.
5. Align footrest extension housing Item 3 with the front leg.
6. Apply some thread locker Item 7 on the thread portion of the screws. Item 5
7. Using a 5/32" allen wrench, attach the footrest extension housing onto the front leg
using the screws provided. Item 5
8. Reattach the footplate adjustment tube and secure it with the
detent pin. Item 6