Convaid Cruiser 10, Replacement Parts & Accessories Manual

Page: 13 / 53

INSTRUCTIONS
888-Convaid (266-8243)
www.convaid.com 20
21
Cruiser 10 Cruiser 10
Close-up
FOOTPLATE
996013
QTY DESCRIPTION PART NUMBER ITEM
1 CX-10 Pivot Footplate Assy RH 504486 1
1 Footplate Adjustment Tube RH 500970 2
1 Footrest Extens. Housing Assy 500690 3
1 Tube Connector 7/8" Heavy Duty 100017 4
2 Screw 1/4"-20 x 1-1/2" Flat Skt 100262 5
1 Detent Pin With Webbing Assembly 503879 6
1 Thread Locker-Medium-Vibra-tite 100690 7
2
5 7
4
1
Cruiser 10-12 Small Angle Adjustable Footplate Assembly Kit RH
Exploded
Assembled
6
996011
QTY DESCRIPTION PART NUMBER ITEM
1 CX-10 Footrest Assembly, RH 504988 1
1 Footplate Adjustment Tube RH 500970 2
1 Footrest Extens. Housing Assy 500690 3
1 Tube Connector 7/8" Heavy Duty 100017 4
2 Screw 1/4"-20 x 1-1/2" Flat Skt 100262 5
1 Detent Pin With Webbing Assembly 503879 6
1 Thread Locker-Medium-Vibra-tite 100690 7
6
5 7
4
1
2
Cruiser 10-12 Small Footplate Assembly Kit RH
Assembled
Exploded
Assembled
3
Angle Adjustable Swing Away Footplate Assy Kit - Right Angle Adjustable Swing Away Footplate Assy Kit - Right
Item Description Qty
1 CX-10 Pivot Footplate Assembly, RH 1
2 Footplate Adjustment Tube, RH 1
3 Footrest Extension Housing Assembly 1
4 Tube Connector 7/8" Heavy Duty 1
5 Screw 1/4"-20 x 1-1/2" Flat Skt 2
6 Detent Pin With Webbing Assembly 1
7 Thread Locker-Medium-Vibra-tite 1
996013 #
Kit Includes
1. Pull out metal pin and remove the existing footplate extension tube. Item 2
2. Using a 5/32" allen wrench, remove both bolts from the housing bracket on the
frame and remove existing footplate assembly components.
3. If needed, install tube connector Item 4 into the front leg by hammering or
pressing it into the front leg tube.
4. Slide the loop portion of the detent pin with webbing assembly over the front
x-brace tube.
5. Align footrest extension housing Item 3 with the front leg.
6. Apply some thread locker Item 7 on the thread portion of the screws. Item 5
7. Using a 5/32" allen wrench, attach the footrest extension housing onto the front
leg using the screws provided. Item 5
8. Reattach the footplate adjustment tube and secure it with the
detent pin. Item 6