INSTRUCTIONS
888-Convaid (266-8243)
71
Cruiser 10
Cruiser 10
www.convaid.com
70
TRUNK POSITIONING
1. Attach the Lateral Trunk Support to the chair by wrapping the two rear straps around
the back of the chair and securing with Velcro
®
.
2.
Attach the single flap, by wrapping the strap on the left flap around the side tubing of
the frame, and securing with Velcro
®
(repeat steps on opposite side)
3.
Thread the scoliosis strap through the plastic loop on the left flap, back through the
plastic loop on the opposite end of the strap, and pull tight.
4. Bring the scoliosis strap across the chest, thread it through the plastic loop on
opposite flap, and fasten with Velcro
®
.
To support the right side of the trunk, attach the support to the chair with the double-
sided Velcro
®
strap on the left side. Detach the strap on the right flap from the tubing, and
tighten scoliosis strap until desired trunk positioning is obtained.
5. To support the left side of the trunk, attach the support to the chair with the double-
sided Velcro
®
strap on the right side. Detach the strap on the left flap from the tubing,
and tighten scoliosis strap until desired trunk positioning is obtained.
Soft Adjustable Lateral Support - Single Flap
●
The Double Flap Lateral Trunk Support brings the trunk to midline position.
● The Inner flaps mobilize the trunk.
● The Outer flaps centralize the trunk and keep the arms in the front of the chair.
●
The Scoli strap aligns the spine.
1. Attach the Lateral Trunk Support to the chair by wrapping the two rear straps around
the back of the chair and securing with Velcro
®
.
2.
To attach the double flap, wrap the strap on the left-hand outer flap around the side
tubing of the frame and secure with Velcro
®
.
3.
Thread the strap on the left-hand inner flap into the plastic loop on the outer flap
working from front to back.
4.
Adjust and secure strap. (Repeat steps 3 and 4 on right-hand flap.)
5.
Bring the long scoliosis strap through the plastic loop on the inner flap on the right-
hand side and across the chest.
6.
Thread the strap through the plastic loop on the inner flap on the left-hand side.
7. Fasten the strap with Velcro
®
.
8. If additional tightness is desired, pull the scoliosis strap further and Velcro
®
it beyond
the inner flap.
9. Attaching Lateral Trunk Support Double Flap
Note: The Lateral Trunk Support - Double Flap can be used to support
either the left or right side of the trunk.
Soft Adjustable Lateral Support - Double Flap
Soft Adjustable Lateral Support - Single Flap
Soft Adjustable Lateral Support - Double Flap
Item Description
Qty
1
Soft Adjustable Lateral Single Flap
1
Item Description
Qty
1
Soft Adjustable Lateral Double Flap
1
995935
995936
#
#
1
1
