7
Programming Summary
Enrol Master Card
Enrolling a Master Card resets the
controller back to Factory Defaults
and deletes all users
Press and hold the S2 button, then press
and hold the S1 button at the same time.
Beep beep beep
Release both buttons and display will
show:
Present Master Card to reader.
Enrol Users
Present Master Card to reader for ~ 5
seconds
Beep, beep beep beep
Present new card
beep
Present another new card
beep
Present another new card
beep
etc
Remove Users
Present Master Card to reader for ~ 5
seconds
Beep, beep beep beep
Press & hold S1
beep beep beep
0 0 1
Repeatedly press S1 until required user
number shown
Press and hold S2
beep
- - -
Door Release Time
Door Open Alarm
Duration
Press S1
t 1
= 1 second (Default)
Press S1
t 2
= 2 seconds etc. up to
Press S1
t 9
= 9 seconds
Press S2
A 1
= 30 seconds (Default)
Press S2
A 2
= 1 minute etc. up to
Press S2
A 9
= 4 minutes 30 seconds
View user number for any card
In normal operating mode, present card
to reader to open door, user number is
briefly shown on the display.
Press button S2 to view number of last
card used.
IMPORTANT
If you lose your Master Card, learning a new one will reset the
SOLO to its factory default condition, and
ALL USERS WILL BE DELETED
.
Please record the number of your Master Card below, to allow a
replacement to be ordered if the original is lost:
SOLO - Programming Guide
