SERVICING
HOW TO CHANGE LIGHT GLOBES
5
Bulb type: 240V 40 watt candle, screw fitting . . .
available from B&D dealers.
MORE ABOUT YOUR CONTROLL-A-DOOR
MEMORY
At the heart of your B&D Controll-A-Door is
a unique Microprocessor. This stores vital
information to control the door operation,
such as: where the door should stop at the
top and bottom, your code and details for
the safety reversing system.
Close the door for better access to the light diffuser.
Turn off at power point. Press light diffuser in at either
end an
. Unscrew globes
anti-clockwise and replace. Snap light diffuser back
into place.
tilt away from handle
Make sure the door is engaged.
Turn the power back on, press UP.STOP.DOWN
button and let the door close to reconfirm the
memory.
This information will be stored during
power failures indefinitely.
CARE OF THE
CONTROLL-A-DOOR
Do not hose the
wall unit or drive
unit. Do not allow
gutters to overflow
onto the drive unit
and do no allow
water to run down
the wall onto the
wall control unit.
Water damage will
invalidate warranty.
AUTOMATIC REVERSING
Your B&D Controll-A-Door incorporates a
unique reversing system. The Controll-A-
Door will reverse instantly if an obstruction
is encountered on the way down. A series
of beeps will be sounded as a warning.
The computer controlled system provides
reliable and sensitive reversing operation.
AUTOMATIC LOCKING
When your Controll-A-Door is in the down
position, with the drive unit engaged, the
door is automatically locked with B&D's
unique motor locking device. Even during
a power failure security is maintained.
The Controll-A-Door cannot be damaged by
pressing the 'wrong' buttons.