WebRelay Users Manual
Input Description
This is the text that will be displayed next to the input status when the ‘Display Input Status’ is enabled. It
can be up to 20 characters in length.
Input ON Color
When ‘Display Input Status’ is set to
Yes
, this field specifies the color that will be displayed when the
input is
on
(voltage applied to input).
Input ON Text
When ‘Display Input Status’ is set to
Yes
, this field specifies the text that will be displayed when the input
is
on
(voltage applied to input).
Input OFF Color
When ‘Display Input Status’ is set to
Yes
, this field specifies the color that will be displayed when the
input is
off
(voltage is not applied to input).
Input OFF Text
When ‘Display Input Status’ is set to
Yes
, this field specifies the text that will be displayed the input is
off
(voltage is not applied to input).
Auto Refresh Page
Web pages traditionally display static information. The WebRelay control page, however, displays
information that is dynamic. Each time the control page is loaded to the browser, it displays a snapshot
of the current status of the unit. If the state of the unit changes, the information on the control page will
be outdated unless the page is re-loaded.
Whenever a user changes the state of the relay via the web browser, the web page will automatically
reload the control page to display current information. If, however, the relay state changes due to a
change in the control voltage input or due to a command sent from another machine, the relay state will
not be updated and the control page information will be obsolete.
In addition, when the optically-isolated input changes, the control page will be obsolete until the page is
refreshed. WebRelay can not force the web page to be updated when the input changes. The ‘Auto
Refresh Page’ option will cause the control page to continually update its contents by setting a timer in
the web page that causes it to be reloaded at a specified time interval.
Duration
If the ‘Auto Refresh Page’ option is set to
Yes
, this field specifies the time interval (in seconds) that the
page will be refreshed. It can be set from 1 to 32 seconds.
Xytronix Research & Design, Inc.
Page 51
