*
M’Ax Installation Guide
15
Issue Number: 6
www.controltechniques.com
2.26
Mounting the drive
Parts supplied
Fitting the mounting brackets to the drive
Figure 2-9
Locations of the mounting brackets
1.
Locate the tabs of the upper mounting bracket (not fitted with a stud)
in the slots near the top of the rear panel of the drive.
2.
Retain the bracket with two of the M4 T20 Torx-head screws
supplied.
3.
Locate the tabs of the lower mounting bracket (fitted with stud S) in
the slots near the bottom of the rear panel of the drive.
4.
Retain the bracket with two of the M4 T20 Torx-head screws
supplied.
Quantity
Part
Purpose
1
M5 nut
Ground stud
1
M5 plain washer
1
M5 spring washer
1
Ground bracket
Safety ground connections
3
Hose clip (11 to 16mm [0.433 to 0.630 in] dia.)
Clamp power cables to the ground bracket
2
Keyed plug-in 4-way connector
Power connections
1
Keyed plug-in 5-way connector and braking link
1
Upper mounting bracket
Mounting the drive
1
Lower mounting bracket
4
M4 x 8mm T20 Torx-head Taptite screws
