cns-
enocean
Batteryless CO2 Sensor User Guide
Page 4 of 8
Rev 1.1
Website:
www.control-network-solutions.co.uk
Product Installation
It is recommended the CO2 sensor is installed in an environment where:
1. The local CO2 level is representative of the complete area being measured i.e. do
not place the unit close to a frequently opened window or A/C unit.
2. A source of either natural or artificial light is available during the hours when the
building is occupied (due to the unit being solar powered).
Installation of back-plate:
The CO2 sensor is designed to be wall mounted. For ease of installation it is supplied
with a back-plate that can be mounted on the wall prior to installation of the CO2 sensor
itself.
The back-plate can be wall mounted either using the screws and rawl-plugs provided,
or alternatively it can be mounted over an existing ‘pattress’ box using the appropriate
machine screws. (Not provided).
Installation of unit on back-plate:
BEFORE FINALLY FIXING THE SENSOR ON THE BACKPLATE, ENSURE THE UNIT
HAS BEEN SET UP AND COMMISSIONED AS PER THE PRODUCT OPERATION
SECTION.
The CO2 Sensor will latch onto the previously mounted back-plate via the latches on
the top of the unit.
Once latched, the securing screw at the bottom of the back-plate can be tightened.
