cns-
enocean
Batteryless CO2 Sensor User Guide
Page 7 of 8
Rev 1.1
Website:
www.control-network-solutions.co.uk
3. Connection of battery
The unit is pre-installed with a non-rechargeable 3.6v Lithium “A” type battery. To
enable commissioning and provide battery back-up operation in continuously low level
light conditions, the battery must be connected by switching DIP Switch 4 on.
Battery
Unit Status
Dip Switch 4
Not connected
Solar powered only
OFF
Connected
Solar + battery powered
ON
4. Commissioning
Please refer to
cns-
enocean Connectivity Kit User Manual.
EnOcean Wireless Information
EnOcean Wireless Systems Range Planning application note,
Battery
LED
Learn Button
DIP Switch
