12
Multi
Tracker
fig 13
Press
to open the menu and step down with
. Select ”Log” and confirm with
Step down with
and select Position - Show, Empty, Delete, or Create”. Confirm with
. ”Delete” and ”Empty” are local and are only valid in its choosen Location or Field.
”Show” or ”Create” are universal and valid for all Locations or Fields.
Step up with
or down with
to navigate the menu tree.Confirm with
or
reverse the selection with
.
When all settings are done, exit with
until one of the two main windows appear
(text mode or profile mode). This data is stored in the MultiTracker controller and not
in the sensor.
6. Getting Started
Save a measurement
To save a measurement, or to perform a new measurement, press
, When doing this,
an option to save
or restart the measurement
will be presented, There is a short
command from the text mode display where it is possible to select position for storing
the measurement profile. Step up with
or down with
to reach desired log
Location or Field. The Location tag will be shown in the lower left margin in the display
window. Fig 14 below, shows that the actual profile will be stored in that Location or
Field, ”General ”
fig 14
It is possible to tag each of the 250 log locations with up to 10 alphanumerical
characters. By entering the log location by tag name, all actual information for the stored
measurement may be retrieved.
