-
21
-
5.
Once the measuring process is finished, the measured values
appear on screen.
6.
The column "MEASURE" indicates the measured values.
7.
The column "VALUE" indicates the capacitor's value as
defined by the user.
8.
The "RND" button enables correction of the measured values
to the closest rounded value under the condition that the
difference between the capacitors doesn't exceed 10%.
9.
The "SAVE" button enables saving the measured (and/or
rounded) values instead of the values entered by the user at
the previous screen "capacitors value".
3.3.5
Capacitor's steps
:
1.
In order to set the number of the capacitors steps in the
system, at the Vital Setting screen scroll down to Capacitors
Steps, and press "Enter".
2.
The Capacitors Steps screen appears. Use the buttons F3 &
F4 to move the cursor, to set the value use buttons F1 & F2,
when finished click “ENTER”.
3.4
Non-vital setting
In order to define the Non-Vital Setting, you must access the
Setting screen by repeating steps from chapter 3.1, paragraphs
1,2,3.
1.
Once the Setting screen appears, scroll to Non Vital Setting
and press "Enter".
2.
The Non Vital Setting screen appears.
