-
15
-
3.
Use the buttons F3 & F4 to move the cursor, to set the value
use buttons F1 & F2, when finished click “ENTER”.
4.
The Setting screen appears.
Figure 3.2 – Settings.
5.
Scroll to TYPE and click Enter in order to change the mode
between single phase and three phases.
3.2
Transformers Ratio.
1.
From Main Menu scroll to SETTING and press "Enter", The
Enter Code screen appears.
If the incorrect password is inserted into the Password
field, an Error message appears and the password
should be reentered
NOTE!
