36
Contrinex Industrial Electronics
1. The mounting brackets for use at both ends of the units. These
brackets can be fixed either in the same plane or at any angle.
Figure 18 illustrates some mounting possibilities.
2. The metal T-nuts, which can be slid into the side groove of the alu-
minum profile. These T-shaped M5 threaded nuts can be freely
adjusted along the unit’s side. To ensure firm alignment, the fixing
points must be set in relation to the length of the device and as close
as possible to the unit’s ends.
FIG. 18: DIFFERENT MOUNTING POSSIBILITIES WITH BRACKETS
FIG. 17: TOP AND BOTTOM MOUNTING
BRACKET (REF. YXW-0001-000)
FIG. 20 : USING T-NUT WITH M5 SCREW
FIG. 19 : T-NUT (REF. YXW-0003-000)
