- 7 -
2 Camera Installation
Open the camera box and take out the camera and accessories. Connect the camera to the
power supply and make sure it is energized. After connecting the camera to the computer by
Gigabit Ethernet cable, please download the SDK for the camera from Hangzhou ContrasTech
website:
The material you need
PC or Laptop with Windows System(XP/7/8/10, 32bit or 64bit)
GigE Cable
Power supply unit for the GigE camera
A
F
-mount lens
with M42 to F-mount adapter/ A C-mount lens with M42 to C-mount adapter
Steps:
1. Open the camera box and fix the camera to the installation position. Connect the camera
with right lens.
2. Connect the camera to the PC(network card) by Gigabit Ethernet cable (CAT5E or CAT6).
3. Choose one of the following power supply methods.
DC power supply: Follow the right cable definition to connect camera with a proper power
adapter (DC 12V) by using a 6pin power I/O hirose cable.
POE: Connect camera with network card or switch which support PoE function by GigE
cable.
3 iCentral Installation
iCentral supports Windows 2000/Windows XP/Windows7/Windows8/Windows10 32/64bit
operating system/Arm/Linux.
Installation Steps
1.
Please download SDK installation package (iCentral) from Our Company website:
2. Click iCentral Setup to install. Choose the camera type you are using, and then install the
driver.
