Contractor 15205, Instructions Manual

Page: 13 / 120

ENGLISH
CONTRACOR
®
CAB-110P/CAB-135P Art. 15205/15206 13
ATTENTION!
Do not look into the reclaimer exhauster outlet while the exhauster is
turning. Injury to the eye or face could occur from objects being ejected
from the exhauster.
4.1.4 Electrical power connection
A wiring schematic is supplied with the cabinet. After wiring is completed, check the
motor rotation by momentarily turn switch on and off. The motor will slowly turn. Check
the rotation of the motor fan through the slots in the motor housing. The fan should rotate
clockwise when viewed from the fan end to the motor.
ATTENTION!
All electrical work must be carried out by a qualified electrician according
to the national and local standards.
4.1.5 Cabinet static pressure
Cabinet static pressure must be set to match the cabinet dimensions and reclaimer
sizes. Open the inlet damper further to decrease static pressure or close it further to
increase pressure.
Use the gloves as an indicator of right cabinet static pressure. With the exhauster on,
the gloves should be inflated, but not elevated off the grate.
4.1.6 Foot pedal
Position the foot pedal on the floor at the front of the cabinet for easy accessibility.
Blast cabinet is designed for one-person operation. Be sure you can quickly remove your
foot from the pedal in an emergency.
4.2. Blasting operation
4.2.1 Media loading
With the exhauster off, add clean dry media, by pouring it into the reclaimer hopper
through the reclaimer door. Do not fill past the cone on the reclaimer.
Do not pour media directly into the cabinet hopper, as overfilling may occur.