audible science
audible science
page 30
INSTALLATION & SETUP
CONT.
DISASSEMBLY & ASSEMBLY OF THE COBRA
The Cobra comes to you with the main components
assembled, and needs to be disassembled for installation.
DISASSEMBLY FOR MOUNTING PROCEDURE
Use a 6mm allen key to undo the overhang locking bolt
on the top of the main body. Next, loosen the two VTA
locking thumb screws, and slide the central tower off the
main body and cross arm.
NOTE: take note of how the central tower fits
through the cross arm, for when you have to
reassemble it.
You are now ready to mount the Central Arm Tower
to the turntable.
POSITIONING CENTRAL TOWER ON TURNTABLE -
DISTANCE OF SPINDLE TO CENTRAL ARM TOWER
Once you have marked the center point of the Central
Arm Tower you will need to drill 4 equispaced holes to
bolt the arm mount onto the plinth.
INSTALLING
& TUNING
YOUR COBRA
Central Tower
Cross arm -
Main Body
with Cross arm
slide inside the Main Body
before inserting the Central
Tower into the Main Body
Fully assembled
