audible science
audible science
page 52
INSTALLATION & SETUP
CONT.
HOW TO ADJUST THE AZIMUTH
cont.
These are used to set the initial reference point. Then
when you adjust the azimuth you can do so with accuracy
and repeatability.
Experienced Cobra users place permanent marker ink or
coloured nail polish into one of the dashes on the azimuth
adjuster next to the stationary index mark.
This gives you the ability to move a few minutes either
way for final adjustment and take note for cartridge to
cartridge variances.
When complete you can lock the azimuth swash plate by
tightening the 4mm grub screws on the cross arm which
located at 90 degrees to the azimuth swash plate.
INSTALLING
& TUNING
YOUR COBRA
