31
W415-0889 / A / 08.11.10
6.2.3
Align the hole in the bottom of the front left log (W135-0450) with the
screw and spacer on the left side of the burner. The middle of this log
rests against the charcoal strip.
6.2.2
Place the charcoal strip log (W135-0448) on top of the grate aligning
the notches in the charcoal strip with the grate.
6.2.1
Place the rear log (W135-0444) on rear bracket, ensure the log is
seated properly on the rear bracket and located on the center pin.
6.2 LOG
PLACEMENT
LOGS MUST BE PLACED IN THEIR EXACT LOCATION IN THE APPLIANCE. DO NOT CHANGE OR MODIFY
FROM THE PROPER LOG POSITION, SINCE APPLIANCE MAY NOT FUNCTION PROPERLY AND DELAYED
IGNITION MAY OCCUR.
THE LOGS ARE FRAGILE AND SHOULD BE HANDLED WITH CARE.
The individual logs can be easily identi
fi
ed by the numbers cast on the underside of each log.
Phazer
TM
logs and glowing embers exclusive to Wolf Steel Ltd., provide a unique and realistic glowing effect
that is different in every installation. Take the time to carefully position the glowing embers for a maximum
glowing effect. During the initial use of the appliance, log colours may vary. During the initial use of the appli-
ance the colours will become more uniform as colour pigments burn in during the heat activated curing pro-
cess.
!
WARNING
6.2.4
Align the hole in the bottom of the front right log (W135-0451) with
the screw and spacer on the right side of the burner. The middle of
the log rests against the charcoal strip.
