Page | 23
IP-SDI 4i Product Manual 042020
Safety Instructions and Warranty
Read before operating equipment.
Cleaning - Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth
for cleaning.
Power Sources - Use supplied or equivalent UL/CSA approved low voltage DC plug-in transformer.
Outdoor Antenna Grounding - If you connect an outside antenna or cable system to the product, be sure the antenna or cable
system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National
Electrical Code, ANSI/NFPA No. 70, provides information with respect to proper grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit,
connection to grounding electrodes, and requirements for the grounding electrode.
Lightning - Avoid installation or reconfiguration of wiring during lightning activity.
Power Lines - Do not locate an outside antenna system near overhead power lines or other electric light or power circuits or where it can fall
into such power lines or circuits. When installing an outside antenna system, refrain from touching such power lines or circuits, as contact
with them might be fatal.
Overloading - Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.
Object and Liquid Entry - Never push objects of any kind into this product through openings as they may touch dangerous voltage
points or short out parts, resulting in a fire or electric shock. Never spill liquid of any kind on the product.
Servicing - Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or
other hazards. Refer all servicing to qualified service personnel.
Damage Requiring Service - Unplug this product from the wall outlet and refer servicing to qualified service personnel under the
following conditions:
o
When the power supply cord or plug is damaged.
o
If liquid spills or objects fall into the product.
o
If the product is exposed to rain or water.
o
If the product does not operate normally by following the operating instructions. Adjust only those controls that are
covered by the operating instructions. An improper adjustment of other controls may result in damage and will often
require extensive work by a qualified technician to restore the product to its normal operation.
o
If the video product is dropped or the cabinet is damaged.
o
When the product exhibits a distinct change in performance, this indicates a need for service.
Heat – This product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including
amplifiers) that produce heat.
* Note to CATV system installer: This reminder is provided to call CATV system installer's attention to Article 820-40 of the National Electrical
Code (Section 54 of Canadian Electrical Code, Part I), that provides guidelines for proper grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the building as close to the point of cable entry as possible.
Warranty: Three (3) year limited warranty on all parts and labor for Contemporary Research manufactured products. Contemporary Research
warrants its manufactured products against defects in materials and workmanship for a period of three years from the day of purchase by
authorized dealer. If Contemporary Research receives notice of such defects during the warranty period; Contemporary Research, at its
option, will repair or replace products that prove to be defective.
Exclusions: The above warranty shall not apply to defects resulting from improper or inadequate maintenance by the customer, customers
applied software or interfacing, unauthorized modifications or misuse, mishandling, operation outside the normal environmental
specifications for the product, use of the incorrect, modified or extended power supply, acts of God, weather, or improper site operation and
maintenance. Please note Contemporary Research SSV-DX Display Express PC product carries a six-month limited warranty.
Product Service: Contemporary Research will test, repair, or replace the product or products without charge if the unit is under warranty. If
the product is out of warranty, Contemporary Research will test, and then repair the product or products. The parts and labor charge will be
estimated by a technician and confirmed by the customer prior to repair. All components must be returned for testing as a complete unit.
Contemporary Research will not accept responsibility for shipment after it has left the premises.
Technical Support: Contemporary Research technicians will determine and discuss with the customer the criteria for repair and/or
replacement. Contemporary Research Technical Support can be contacted through one of the following resources: e-mail support at
[email protected] or phone at: 972-931-2728
Return Material Authorization (RMA) Number: Before returning a product for repair or replacement, request an RMA from Contemporary
Research’s technical support. Provide tech support with a return phone number, e-mail address, shipping address, product serial numbers
