manualshive.com logo in svg

Contemporary Research IP-SDI 4i, Product Manual

Share
Download
Contemporary Research IP-SDI 4i Product Manual Download Page 12

Page | 12 

 

IP-SDI 4i Product Manual 042020 

Click on the IP-SDI 4i tab in the device section to view the list of IP-SDI 4i units.  Click on the Ch List tab

 

to create a channel list.  Channel 

information will need to be entered in the appropriate fields for each IPTV stream.  After the fields are complete, click on the Add/Modify 
button and the channel list will be updated.  The IP-SDI 4i supports one-part or two-part channel numbers to be compatible with hybrid IP/RF 
systems.  Two-part channel numbers are entered as X-X. 
 

Once the channel list is complete, it will need to be uploaded to each IP-SDI 4i.  In the device list, click on the checkbox to select the IP-SDI 4i 
units to receive the channel list.  Click on the Send Channel List button to send the channel list. 
 
The channel list can be saved as a text file for later recall by clicking on the Create File button. 

 

 

Text Editor 

Notepad or another text editor can be used to create a channel list. The following is an example list of eight channels.  The order of 
information is UDP/RTP, multicast address, port, program ID, channel number, then name. 

For Contemporary Research QMOD/QIP encoders, the default Program ID for Program A is 1, and 2 for Program B.  In the alternate format, 
the udp://@ can be shortened to start with U or R (RTP).  
 
udp://@239.027.0.101:1234 :1 :1 :Fox 

udp://@239.027.0.102:1234 :2 :2 :CNN 
udp://@239.027.0.103:1234 :1 :3 :Weather 
udp://@239.027.0.104:1234 :2 :4 :KOBJ 

udp://@239.027.0.105:1234 :1 :5 :ESPN 
udp://@239.027.0.106:1234 :2 :6 :Bloom 
udp://@239.027.0.107:1234 :1 :7 :Sign 1 
udp://@239.027.0.107:1234 :2 :8 :Sign 2 

 
Alternate format: 
U239.027.0.101:1234 :1 :1 :Fox 

U239.027.0.102:1234 :2 :2 :CNN 
U239.027.0.103:1234 :1 :3 :Weather 
U239.027.0.104:1234 :2 :4 :KOBJ 
U239.027.0.105:1234 :1 :5 :ESPN 

U239.027.0.106:1234 :2 :6 :Bloom 
U239.027.0.107:1234 :1 :7 :Sign 1 
U239.027.0.108:1234 :2 :8 :Sign 2 
 

 
 
Example showing two-part channel numbers: 

udp://@239.027.001.030:5010 :3 :5.1 :KXAS-DT 
udp://@239.027.001.030:5010 :4 :5.2 :COZI-TV 
 
Save the list as a .txt file to the C:/CR Data/Toolbox/IpSDI4i folder.  The list can be opened in CR Toolbox using the Get File button.  In the 

device list, click on the checkbox to select the IP-SDI 4i’s to receive the channel list.  Click on the Send Channel List button to send the channel 
list.  
 
 

 
 
 

 
 
 
 

 
 
 
 

Summary of Contents for IP-SDI 4i

























Reviews:

No comments

Brands by name

Popular brands

Load more brands