Contemporary Controls CTRLink EIAR-10T, User Manual, Page: 35 / 78

Configuration
4-33
TCP/IP configuration
Enter the host and the domain name, as well as the IP address and the
subnet mask of your router here. To activate the online help for the
individual items, simply click on the appropriate menu option.
Brief info IP addresses:
An IP address consists of the number of the IP network and of the
number of a host in this network.
192.168.1.100
Number of network
Number of computer in network 192.168.1
The size of the network portion may be varied via this IP address.
It is determined by the network class. The example uses network class
C, three numbers for the network, and one for the client.
For IP addresses, any numbers between 1 and 254 are permissible.
If a higher address is set, the router will not be found in the
network by the browser. In this case, either restore the factory
default settings or set a valid network address using the serial
console (see Section 4.2.4).
Make sure that the address you are setting is not already assigned
within the Ethernet. The default setting 192.168.1.100 corresponds to
client no. 100 in a C class network with no. 192.168.1. Make sure that
the IP address is the same as that of the network address.
Configuring the administrator access
Enter the password for administrator access in these fields. This can be
max. 8 characters long and should consist of letters, digits and special
characters. If nothing is entered here, the old password is kept.
CAUTION