Contemporary Controls CTRLink EIAR-10T, User Manual, Page: 15 / 78

Description of Functions
3-13
The connection is only cleared if this is specified manually by the
remote computer.
Please note that dialling during an existing modem connection is
not possible, since the telephone line is already busy.
3.4 Call-back functionality
The router can be configured such that it will not work as a dial-in server
(see Section 4.3.1.15). Instead, in the case of an incoming call, it will
hang up immediately and then automatically establish a connection to
the Internet provider configured. The router can now be addressed in
the Internet.
To address the router using its domain name, it is recommended to
configure also an appropriate dynamic DNS provider when selecting
this function (see Section 4.3.1.14).
To provide a secure connection via the Internet, it is additionally
recommended to set up a Virtual Private Network (VPN).
3.5 Start-up
The start-up of the Internet Access Router is carried out in 3 steps:
•
Connecting
•
Executing the boot process
•
Configuring the router
3.6 Connecting
First connect the router to the hub (switch) at the 10-Base-T socket
using a patch cable. If you want to connect only a single host to the
router and not a complete network, use a cross-over cable.
Now connect the RJ-11 interface labelled with MODEM to a TAE socket
using a telephone cable
NOTE