12. Auto RUN Function
Software Manual
41
12.
Auto RUN Function
When the user want to setup many machine to same setting, or to perform same action automatically, the
Auto-Run function is useful.
In this case, the function allows you to write the file containing the processing sequence (AutoRUN.inf)
on the ATA card and plug that card in to carry out the processing in accordance with the sequence
written in AutoRUN.inf.
The Auto-Run function is a very effective tool to use in the above situation.
CAUTION
While the Auto-Run function has been working for an ATA card, it does not work for any other
ATA card containing AutoRUN.inf even when the other card is plugged. Before the Auto-Run
function can work for the second ATA card, unplug the currently active ATA card and plug the new
ATA card.
Usage of Auto-Run function
If user wants to use Auto-Run function, the “Start AutoRun Function” check box in “Service” tab of
“CONTEC Manager” must be checked.
Note!
If status of the “Start AutoRun Function” check box in “Service” tab of “CONTEC Manager” is
changed, it will be take effect at the next the system is booted.
