3. Each Component Function
Hardware Manual
21
DIP-Switch setting
Table 3.11. SW list
Silk Function Remarks
SW2
Setting the OS operation
8-bits
SW1
Opened SW to user
4-bits
DIP switch for Opened SW to user (SW1)
SW1 is a general-purpose switch available for use by the application.
Refer to the bundled CD-ROM(CONTEC SDK for CE420) for details on how to use this DIP switch.
SW1
1
2
3
4
ON
Figure 3.5. DIP switch
DIP switch for Setup of OS operation (SW2)
This switch sets OS operation. For details, refer to the software manual.
Factory setting
1 2 3 4 5 6 7 8
ON
Back side of unit
Figure 3.6. Setup of OS operation
CAUTION
To use the unit normally, leave the DIP switch as above.
WARNING
Operating a connector or jumper on the internal CPU board, which is not covered by this manual,
can cause the unit to malfunction or develop operational problems. Never touch any of those
on-board connectors and jumpers.
