3. Each Component Function
Hardware Manual
19
AC adapter jack
This jack accepts the optional AC adapter [IPC-ACAP12-01].
Do not plug any other AC adapter into the AC adapter jack.
Table 3.7. AD adapter jack pinouts
1
2
Pin No.
Name
1
2
+12V input
GND
CAUTION
When the AC adapter jack is used, the unit requires no power input via the power input connector.
As the AC adapter, be sure to use the option [IPC-ACAP12-01].
Power supply input connector
The power supply to be used must conform to the following specifications:
-
Power supply voltage: +12VDC±5%
-
Power supply capacity: 2.5A or more
The following table lists the pin specifications of the power connector on the back of the unit.
Table 3.8. Power input connector pinouts
Connector type
+12VDC input connector
Type
MC1,5/3-GF-3,81 (PHOENIX CONTACT)
1
2
3
Pin No.
Signal name
1 FG(Frame
Gnd)
2 GND
3 +12V
* Use the bundled MC1,5/3-STF-3,81 (PHOENIX CONTACT) for the connector on the cable side.
CAUTION
-
Connect a power supply to either the power connector or the AC adapter jack. Never connect it to
both of them, or the unit can cause faults.
-
If you use a power supply other than the option, be sure to take safety measures for the power
supply, such as overload protection. Use meticulous care not to use the power supply at wrong
polarities or voltage as doing so can break the unit and/or the power supply.
