2. Setup
10
DIO-1616B-LPE
Step 1 Installing the Software
This section describes how to install the Driver libraries.
Before installing the hardware on your PC, install the Driver libraries from the bundled
API-PAC(W32).
Although some user interfaces are different depending on the OS used, the basic pro cedure is the
same.
About the driver to be used
Two Analog I/O drivers are available : API-DIO(WDM) and API-DIO(98/PC).
API-DIO(WDM) is a driver to perform analog I/O under Windows.
When this product is used, digital input/output high performance driver "API-DIO(WDM)" is used.
If you use this product with digital input and output high-performance driver API-DIO (WDM).
If API-DIO (98 / PC) using existing systems continue to use API -DIO (98 / PC).
Please note that the API-DIO 98 (PC) does not support Windows 8 or later, and the 64-bit OS.
Use the API-DIO(98/PC)
If you are installing from media attachments, select "all" from the "Installer" later in this chapter and
starts the execution environment and development environment packages installer
Please see the Help folder in the installed hardware installation instructions please see reference in
help media attachments or downloaded from
CONTEC’s Web site
development environment.
Furthermore, that applies to the default step 4 software described below, see co nfig.chm folder
installed execution environment
Summary of Contents for DIO-1616B-LPE
Page 7: ...vi DIO 1616B LPE ...
Page 33: ...2 Setup 26 DIO 1616B LPE ...
Page 54: ...6 About Hardware DIO 1616B LPE 47 Block Diagram Figure 6 1 Block Diagram ...
Page 56: ......