Contec DIO-1616B-LPE User Manual Download Page 9

Page: 9 / 57

1. Before Using the Product

DIO-1616B-LPE

Windows/Linux compatible driver libraries are attached.

Using the attached driver library API-PAC(W32) makes it possible to create applications of

Windows/Linux. In addition, a diagnostic program by which the operations of hardware can be
checked is provided.

This product has a digital filter to prevent input signals from carrying noise or a chattering.

This product has a digital filter to prevent input signals from carrying noise or a chattering. All input

terminals can be added a digital filter, and the setting can be performed by software.

Output circuits include zener diodes for surge voltage protection and overcurrent protection circuit.

Zener diodes are connected to the output circuits to protect against surge voltages. Similarly,

overcurrent protection circuits are fitted to each group of 8ch outputs.

Functions are compatible with PCI Express compatible board DIO-1616B-PE and PCI compatible

board PIO-16/16B(PCI)H.

The functions same with PCI Express compatible board DIO-1616B-PE and PCI compatible board
PIO-16/16B(PCI)H are provided.

Functions and connectors are compatible with PCI compatible board PIO-16/16B(LPCI)H series.

The functions same with PCI compatible board PIO-16/16B(LPCI)H are provided.

In addition, as there is compatibility in terms of connector shape and pin assignments, it is easy to
migrate from the existing system.

LabVIEW is supported by a plug-in of dedicated library VI-DAQ.

Using the dedicated library VI-DAQ makes it possible to create each application for LabVIEW.

Summary of Contents for DIO-1616B-LPE


























































Search results

Summary of Contents for DIO-1616B-LPE

Reviews:

Related manuals for DIO-1616B-LPE

Brands by name

Popular brands

Contec DIO-1616B-LPE, User Manual

Search results

Summary of Contents for DIO-1616B-LPE

Reviews:

Related manuals for DIO-1616B-LPE

Brands by name

Popular brands