GV-Multi Quad Card
The GV-Multi Quad Card connects up to 5 TV monitors (spot monitors). One port
supports up to 16 screen divisions, while the other 4 ports support 1 and 4 screen
divisions. It also allows self-defined channel sequence and division location on the
monitor screen.
Packing List
Installation Guide x 1
1
2
GV-Multi Quad Card x 1
3
4
DB15 to 5 BNC connectors
Port 1 supports up to 16 screen divisions.
Port 2 ~ Port 5 support 1 and 4 screen divisions.
Specifications
Interface for
GV-Video Capture Card
TV Output
TV Monitor Layout
Compatible Model
Dimensions (W) x (H)
178 x 104 (mm) / 7.01 x 4.09 (in)
1
40-Pin Ribbon Cable x 1
40-pin connector
GV-250, GV-600, GV-650, GV-800, GV-1120,
GV-1240, GV-1480, GV-2004 and GV-2008.
1-5 D-Type Video Cable x 1
There are no specific system requirements for the GV-Multi Quad Card. Only
ensure the computer meets the system requirements by the GV Video Capture
Card installed on that computer.
Use the supplied Ribbon Cable to connect the GV-Multi Quad Card to the GV Video
Capture Card as illustrated below.
After you install the GV-Multi Quad Card to the computer, the Hardware Wizard
will automatically detect the device. Ignore the Wizard, insert the Software CD,
select I
nstall or Remove GV-Series Driver
, and then click
Install or Remove
GV-Series Cards Driver
. When the dialog box appears, click the
Install
button. The card driver will be installed automatically.
When the installation is complete, exit the dialog box.
GV-Multi Quad Card
GV Video Capture Card
40-Pin Ribbon Cable
3
2
1-5 D-Type
Video Cable
Installing the Drivers
Note
Input Singal
16 channels
TV 1
TV 2
TV 3
TV 4
TV 5
5
40-Pin Ribbon Cable with Four 10-Pin Headers x 1
(Only for GV-2004 or GV-2008 Card)
Connections
