Contec DAI12-4(USB)GY, User Manual

Page: 31 / 73

3. Setup
26
DAI12-4(USB)GY
- When the power is turned on or the module is reset, the current
output signal will be 0mA.
- To avoid any malfunction, the current output signal should not be
connected to the analog ground.
- To avoid any malfunction, the current output signal should not be
connected to another analog output signal or the output signal of
an external device.
- To avoid any malfunction, the connector plug should not be
attached or detached when the power for the module or the
external device is on.
- In situations where the connecting cable is subject to the effects of
noise, the accurate current output can fail. The connecting cable
should be installed away from any source of noise.
CAUTION