1. Introduction
8
DAI12-4(USB)GY
- Regardless of the foregoing statement, CONTEC assumes no
responsibility for any errors that may appear in this document nor
for results obtained by the user as a result of using this product.
- It may cause a trouble in recognizing and operating the device
according to the kind of USB hub. If you use the USB hub, we
encourage you to take advantage of the CONTEC’s product loan
service to confirm operation before purchasing.
- Regarding “CE EMC Directive Notice”.
Please connect the Interface Connector with a shielded cable to
meet the mentioned standard above.
The ferrite core must be installed in interface connecting cable so
that this product may suit the above-mentioned standard.
And USB
connector must be earthed.
Name
Maker
Turn
Quantity
Installation Site
E04SR301334 *
SEIWA
2
1
on USB cable at product side
E04SR241336A *
SEIWA
1
1
on signal cable at product side
E04SR200917 *
SEIWA
3
1
on AC adapter at product side
* Equivalent product can also be used.
Image diagram
Summary of Contents for DAI12-4(USB)GY
