Contec DAI12-4(USB)GY, User Manual

Page: 41 / 73

3. Setup
36
DAI12-4(USB)GY
Installation Orientation
Please use the module following orientation illustrated in the graph
when the module is mounting on a DIN rail and being used on a
desk. It should be noted that lateral slit of the module being covered
brings about malfunction.
In addition, please use the supplied two rubber feet when setting on
a desk or others as figure 3.9(A).
Correct installation orientation
Figure 3.9. Installation Orientation
(C) Horizontal, Front (D) Side
Do not cover the ventilation holes
(A) Vertical, Front
Rubber feet
(B)Bottom
Front
Rear