2 Setup
CPSN-MCB271-S1-041 Reference Manual (Hardware)
25
Cable Connection
Cable Connection
Regarding connection
When connecting the product to an external device, use the supplied connector plug.
For wiring connector, strip off the covered part of a wire rod (8mm ± 0.5mm) and insert it to the
opening.
While pressing the orange part in the center of the connector with a precision screwdriver or a similar
tool, insert the cable into the round hole. After that, release the pressed part to fix the cable in place.
Removing the connector plug by grasping the cable can break the wire.
About a caution mark
on the product:
Use copper wires that tolerate the temperature of 75 degrees Celsius and higher.
Figure 2.26. Cable connection
CAUTION
