Contec BX-951-DC series, User Manual

Page: 9 / 111

1. Introduction
2
IPC-BX950T1 / IPC-BX950T2 / IPC-BX950T3
User’s manual
- Adoption of 945GME Chipset to allow the mounting of Intel Core Duo / Celeron M processor
Adopting the Intel (R) 945GME, ICH7M-DH chip set, IPC-BX950T1 series achieve a high-level
computing and drawing ability by using the 1.20GHz (FSB 533MHz) ultra low voltage Intel (R) Core
(TM) Duo processor. This product is ideal for the content delivery through the large display. It also
has 1GB memory.
Adopting the Intel (R) 945GME, ICH7M-DH chip set, IPC-BX950T2 series have the 1.06GHz (FSB
533MHz) ultra low voltage Celeron (R) M processor. This product is ideal for the content delivery
through the large display. It also has 512MB memory.
Adopting the Intel (R) 945GME, ICH7M-DH chip set, IPC-BX950T3 series achieve a high-level
computing and drawing ability by using the 1.66GHz (FSB 667MHz) ultra low voltage Intel (R) Core
(TM) Duo processor. This product is ideal for the content delivery through the large display. It also
has 1GB memory.
- The extended interface such as Dual LAN, USB2.0, or Serial
It has a variety of extended interface such as 1000BASE-T x 2, USB2.0 x 4, serial (RS-232C) x 2.
It has two CF card slots that can use for OS and data. They are very useful because you can use one slot
for system start-up and the other for maintenance, system log, or taking away the collected data. It also
has a LVDS interface as well as a general-purpose analog RGB to display in double screens.
- Safety design required for embedded applications
Unnecessary trouble can be avoided by the use of clamps for prevention of cable disconnection and the
use of metal fittings for prevention of CF card disconnection. Retention of CMOS data by EEPROM
allows the system to start up even when the battery has run out. For Windows XP Embedded installed
model, it is possible to use the EWF*1 function of OS. It is designed for safety required for embedding
purpose, for example, prohibiting unwanted writing to the CF card with EWF function will relieve the
concern about the writing limits to the CF card and prevent an unintentional system alteration.
*1 EWF (Enhanced Write Filter) is a function specific to Windows XP Embedded that protects the disk from being actually written by
redirecting the writing to RAM.
- The adoption of a fan-less, CF card configuration providing high levels of reliability and quietness
It achieves the air-cooling system (fan-less) by using a large heat sink. It also achieves a high-level
reliability and quietness by adopting CF card (bootable) as its storage device.
- A wide range of power supplies (12 - 24VDC) supported
As the product supports a wide range of power (12 - 24VDC), it can be used in a variety of power
environments.
Supported OS
- Windows XP Embedded