Contec BX-951-DC series, User Manual

Page: 34 / 111

4. BIOS Setup
IPC-BX950T1 / IPC-BX950T2 / IPC-BX950T3 User’s manual
27
IDE Adapters
The IDE adapters control the CF card. Use a separate sub menu to configure each CF card.
Use the legend keys to navigate through this menu and exit to the main menu. Use Table 4.3 to
configure the hard disk.
Table 4.3. IDE Adapters configurations
Item Options Description
IDE HDD Auto-detection Press Enter
Press Enter to auto-detect the CF card on this channel. If
detection is successful, it fills the remaining fields on this
menu.
IDE Channel 0/2
Master/Slave
None
Auto
Manual
Selecting ‘manual’ lets you set the re-maining fields on this
screen. Selects the type of fixed disk. "User Type" will let
you select the number of cylinders, heads, etc.
Note: PRECOMP=65535 means NONE !
Capacity
Auto Display your CF
card size
Disk drive capacity (Approximated). Note that this size is
usually slightly greater than the size of a formatted disk
given by a disk checking program.
Access Mode
CHS
LBA
Large
Auto
Choose the access mode for this CF card.
The following options are selectable only if the ‘IDE Channel 0/2 Master/Slave’ item is set to ‘Manual’
Cylinder
Min = 0
Max = 65535
Set the number of cylinders for this CF card.
Head
Min = 0
Max = 255
Set the number of read/write heads
Precomp
Min = 0
Max = 65535 **** Warning :
Setting a value of 65535 means no CF card
Landing zone
Min = 0
Max = 65535
****
Sector
Min = 0
Max = 255
Number of sectors per track