Contec BOX-PC 961D Series, User Manual

Page: 14 / 69

2. System Reference
BX-961D Series User’s Manual
7
2.
System Reference
Specification
Table 2.1. Functional Specification (1/2)
Model BX-961D
CPU Intel ® Core™ i7 Processor 610E 2.53GHz
Chipset
Intel ® QM57
BIOS Manufactured by Insyde
Memory 4GB, 204pin SO-DIMM socket x 1, PC3-8500(DDR3 1066)DDR3 SDRAM
Graphics
Controller
Intel ® HD Graphics (with Intel ® Core™ i7)
Video RAM Main memory shared
Video BIOS 64KB (C0000H-CFFFFH)
System
Resolution DVI-D 640 x 480, 800 x 600, 1,024 x 768, 1,152 x 864, 1,280 x 600, 1,280 x 720, 1,280 x 768,
1,280 x 800, 1,280 x 960, 1,280 x 1,024, 1,360 x 768, 1,366 x 768, 1,400 x 1,050, 1,440 x 900,
1,600 x 900, 1,600 x 1,200, 1,680 x 1,050, 1,920 x 1,080, 1,920 x 1,200 (reduce blanking)
(16,770,000 colors)
Analog
RGB 640 x 480, 800 x 600, 1,024 x 768, 1,152 x 864, 1,280 x 1,024, 1,280 x 600, 1,280 x 720,
1280 x 768, 1280 x 800, 1280 x 960, 1280 x 1024, 1360 x 768, 1366 x 768, 1,400 x 1,050, 1440 x
900, 1600 x 900, 1,600 x 1,200, 1,680 x 1,050, 1792 x 1344, 1856 x 1392, 1,920 x 1,080, 1,920 x
1,200 (16,770,000 colors)
Audio HD Audio-compliant, Line-out x 1
LAN *1 LAN-A : Intel 82577LM Controller, LAN-B : Intel 82574L Controller
1000BASE-T/100BASE-TX/10BASE-T, Supports Wake On LAN (LAN-B)
USB USB 2.0-compliant x 4
Serial RS-232C (general-purpose) : 1channel, Baud rate : 50 - 115,200bps
Hardware monitoring Monitoring CPU temperature, board temperature, power voltage
Watch dog timer Software programmable, 255 level (1sec - 255 sec) Causes a reset upon time-out.
RTC/CMOS Lithium backup battery life : 10 years or more
The real-time clock is accurate within
 3 minutes (at 25  C) per month
Power Management
Power management setup via BIOS
Power On by Ring / Wake On LAN
Supports PC98/PC99 ACPI Power management
Interface
Display
2 ports (29-pin DVI-I connector x 1, 25-pin DVI-D connector x 1),
DVI-analog RGB conversion adapter is attached
Audio Line-out : 3.5 φ Stereo mini jack, Full-scale output level 1.2Vrms (Typ.)
CFast card slot 2-slots (CFast1 / CFast 2), CFast CARD (Type I) x 2*2, bootable
BX-961D-DC7000 : None,
BX-961D-DC7311 : CFast2 is finished mounting CFast (4GB, 1 partition)*3,
BX-961D-DC7312, BX-961D-DC7316 : CFast2 is finished mounting CFast (8GB, 1 partition)*3
Serial ATA 1-slot, slot-in system, 2.5-inch SATA HDD, Corresponding to serial ATA 2.0 standard port
LAN *1 2 ports (RJ-45 connector)
USB 4 ports (TYPE-A connector x 4)
RS-232C 1 port (9-pin D-SUB connector [male])
*1 : If you use the 1000BASE-T, be careful of the operating temperature.
For more details on this, refer to chapter3, Installation Requirements.
*2 : CFast 2 can only be used with the models that have pre-installed operating systems (BX-961D-DC7311/7312/7316).
It cannot be used with the BX-961D-DC7000.
*3 : The capacity of CFast is a value when 1GB is calculated by 1 billion bytes. The capacity that can be recognized from
OS might be displayed fewer than an actual value.