3. Hardware Setup
BX-961D Series User’s Manual
13
Attaching the Attachment Fittings
(1) Use screws to attach the bundled attachment fittings with a screw.
Do not tighten screws with excess force.
Figure 3.3. Attaching the Attachment Fittings
CAUTION
Screw holes may be damaged if screws are tightened with a torque greater than the specified torque.
The specified tightening torque is 5 - 6kgf
cm.
Attaching the FG
(1) Use screws to attach the FG.
*
Attached screw (M3 x 8)
Figure 3.4. Attaching the FG
CAUTION
The FG pin of this product is connected to the GND signal of the DC power connector (DC -IN).
Note that the connection cannot be cut off.
Screw holes may be damaged if screws are tightened with a torque greater than the specified
torque.The specified tightening torque is 5 - 6kgf
cm.
Summary of Contents for BOX-PC 961D Series
