Constructor 5411074183592, Original Instructions Manual

Page: 27 / 53

tool. If it is damaged, the power tool must be
repaired. Many accidents are caused by using
poorly maintained power tools.
Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to jam and are easier to control.
Use the power tool, accessories and cutting tools,
etc., in accordance with these instructions and in the
manner intended for the particular type of power
tool, taking into account the working conditions and
the work which needs to be done. Using a power
tool in ways for which it was not intended can lead
to potentially hazardous situations.
Service
Your power tool should be serviced by a qualified
specialist using only standard spare parts. This will
ensure that it meets the required safety standards.
as well as the additional safety instructions.
WARNING: Packaging materials
are not toys! Children must not
play with plastic bags! Danger of
suffocation!
In this manual and/or on the machine the following
symbols are used:
Warning / Danger!
Read manual before
use.
Wear ear protection.
Wear eye protection.
Always wear a dust
mask.
Always wear protective
gloves
In accordance with
essential applicable
safety standards of
European directives
Double insulated
Gevaar: elektrische
spanning.
Brandgevaar!
Hou omstanders op
afstand.
Neem de stekker uit het
stopcontact.
speed
Disc diameter diamond
Left / right handle
Machine-specific Safety Warnings
Safety Warnings Common for Grinding,
Sanding, Wire Brushing or Abrasive
Cutting-
Off Operations
This power tool is intended to function as a
grinder, sander, wire brush or cut-off tool.
Read all safety warnings, instructions,
illustrations and specifications provided with
this power tool. Failure to follow all instructions
listed below may result in electric shock, fire and/or
serious injury.
This power tool is not recommended for
polishing. Operations for which the power
tool was not designed may create a hazard
and cause personal injury.
Do not use accessories which are not
specifically designed and recommended by the
tool manufacturer. Just because the accessory
can be attached to your power tool, it
does not assure safe operation.
The rated speed of the accessory must be at
least equal to the maximum speed marked
on the power tool. Accessories running faster
than their rated speed can break and fly apart.
The outside diameter and the thickness of
your accessory must be within the capacity
rating of your power tool. Incorrectly sized
accessories cannot be adequately guarded
or controlled.
The arbor size of wheels, flanges, backing
pads or any other accessory must properly
fit the spindle of the power tool. Accessories