CONSTRUCTA CN151151, Instruction Manual

Page: 20 / 56

20
Setting the microwave
Example: microwave power setting 600 W
1.
Press the required microwave power setting.
The selected microwave power setting lights up in the
display, and "1:00 min" appears.
2.
Set a cooking time using the rotary selector.
3.
Press the "start" button.
The cooking time starts counting down.
The cooking time has elapsed
A signal sounds. Open the appliance door or press "stop". The
clock reappears.
Changing the cooking time
This can be done at any time. Change the cooking time using
the rotary selector.
Pausing
Press the "stop" button once, or open the appliance door. After
closing the door, press the "start" button again.
Cancelling
Press the "stop" button twice, or open the door and press the
"stop" button once.
Note: You can also adjust the cooking time first and then the
microwave power setting.
Cooling fan
The appliance is equipped with a cooling fan. The fan may run
on even if the oven has been switched off.
Notes
■
The cooking compartment remains cold during microwave
operation. The cooling fan will still switch on. The fan may run
on even when microwave operation has ended.
■
Condensation may appear on the door window, interior walls
and floor. This is normal and does not adversely affect
microwave operation. Wipe away the condensation after
cooking.
Memory
You can save the settings for a dish in the memory and call it
up again at any time.
The memory is useful for if you frequently prepare a specific
dish.
Saving memory settings
Example: 360 W, 25 minutes
1.
Press the
i
button.
"M" appears in the display.
2.
Press the required microwave power setting.
"M", the selected power setting and "1:00 min" appear in the
display.
3.
Set the cooking time using the rotary selector.
4.
Confirm by pressing the
i
button.
The clock reappears. The setting is saved.
Notes
■
You cannot save several microwave power settings one after
the other.
■
You cannot save automatic programmes.
■
You can save the memory settings and start the appliance
immediately. When finishing, instead of pressing
i
, press
"start".
■
Saving a new setting in the memory:
press the
i
button.
The old settings appear. Save the new programme as
described in steps 1-4.
Starting the memory
It is very easy to start the saved programme. Place your meal
into the appliance. Close the appliance door.
1.
Press the
i
button.
The saved settings are displayed.
2.
Press the "start" button.
The cooking time counts down in the display.
The cooking time has elapsed
A signal sounds. Open the appliance door or press "stop". The
clock reappears.
Pausing
Press the "stop" button once, or open the appliance door. After
closing the door, press the "start" button again.
Cancelling
Press the "stop" button twice, or open the door and press the
"stop" button once.
VWRS VWDUW
PLQ
NJ
L
J
VWRS VWDUW
L J
PLQ
NJ