1
C6010 • C6020 • C6030
C6010 • C6020 • C6030
Keyboard
MODE
= Selects the settings or escapes from error traps, calibration proce-
dures, etc..by returning to the original mode.
éê
= Buttons for entering a value or for selecting a function.
OK
= Proceeds a function.
CAL
= Starts a calibration.
STORE
= Stores the displayed value or send it to a computer or printer.
HOLD
= Holds display when measuring or shows a built-in manual during a
setup.
Introduction
Introduction
This instrument is manufactured with the latest technology and needs no particu-
lar maintenance.
Consort
certifies that this instrument was thoroughly inspected
and tested at the factory prior to shipment and found to meet all requirements
defined by contract under which it is furnished. However, dimensions and other
physical characteristics may differ.
The normal operating temperature should be between 0° and 40°C. Never use
the instrument in a room with high humidity (>95 %) or at very low temperatures
(condensation water!).
Manufacturer
Manufacturer
Consort bvba
Parklaan 36
Tel (+32)(14)41 12 79
B2300 Turnhout
Fax (+32)(14)42 91 79
Belgium
Belgium
E-mail: [email protected]
Warranty
This instrument (excluding all accessories) is warranted against defective material
and workmanship for a period of thirty-six (36) months from the date of shipment
ex factory.
Consort
will repair all defective equipment returned to it during the
warranty period without charge, provided the equipment has been used under
normal laboratory conditions and in accordance with the operating limitations and
maintenance procedures in this instruction manual and when not having been
subject to accident, alteration, misuse or abuse. A return authorisation must be
obtained from
Consort
before returning any product for warranty repair on a
freight prepaid basis!
Consort
is not liable for consequential damages arising out of the use or handling
of its products.
Servicing
Servicing
In the event of this instrument being returned for servicing, the owner is requested
to remove the power supply lead and
NOT
to send the following items unless they
are suspect:
Manual
Cables
Accessories
If serious malfunctioning occurs, stop using the unit immediately and consult your
local
Consort
dealer.
Batteries
Batteries
The batteries can be replaced by opening the bottom compartment of the cabinet.
Only use NiMH batteries!
AC adaptor
AC adaptor
Connect the AC adapter (9 V, 300 mA for 230 V~ or 120 V~) to the DC socket.
Avoid
to use an AC adaptor without NiMH batteries being inserted in the instrument!
Do not hold the adaptor by wet hand!