5
5.4 Operation
Consult an expert when in doubt about the operation, safety or connection of the device.
If it is no longer possible to operate the product safely, stop using it and prevent unautho-
rised use. DO NOT attempt to repair the product yourself. Safe operation can no longer be
guaranteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stress.
Use the outdoor sensor in an area protected from adverse weather, moisture and direct
sunlight.
5.5 (Rechargeable) batteries
Pay attention to correct polarity when inserting the batteries.
If you do not plan to use the product for an extended period, remove the batteries to prevent
damage from leaking. Leaking or damaged batteries may cause acid burns if they come
into contact with your skin. Always use suitable protective gloves when handling damaged
batteries.
Batteries must be kept out of reach of children. Do not leave batteries lying around, as there
is risk that children or pets may swallow them.
All batteries should be replaced at the same time. Mixing old and new batteries in the
device can lead to battery leakage and device damage.
Batteries must not be dismantled, short-circuited or thrown into open flames. Never attempt
to recharge non-rechargeable batteries. This may cause an explosion!
5.6 Power adapter
Do not modify or repair mains supply components including mains plugs, mains
cables, and power supplies. Do not use damaged components. Risk of death by
electric shock!
Connect the product to a wall socket that can be accessed easily.
Only use the supplied mains adapter as a power supply.
Only connect the power adapter to a normal mains socket connected to the public supply.
Before plugging in the power adapter, check whether the voltage stated on the power
adapter complies with the voltage of your electricity supplier.
Never connect or disconnect the power adapter if your hands are wet.
Never pull the cable to disconnect the power adapter from the mains socket. Instead, al-
ways use the gripping surfaces on the mains plug.
For safety reasons, disconnect the power adapter from the mains socket during storms.
Do not touch the power adapter if there are any signs of damage, as this may cause a fatal
electric shock! Proceed as follows:
– First, cut off the power supply to the mains socket to which the power adapter is con-
nected (switch off the corresponding circuit breaker or remove the safety fuse, and
then switch off the corresponding RCD protective switch so that all poles of the mains
socket are disconnected).
– Unplug the power adapter from the mains socket.
– Use a new power adapter of the same design. Do not use the damaged power adapter
again.
Make sure that the cable is not pinched, kinked or damaged by sharp edges.
Always lay cables so that nobody can trip over or become entangled in them. Risk of injury!
Operating instructions
RF6036B Wi-Fi weather station
Item no. 2525294
1 Intended use
This product is intended to be used as a weather station. It features a sensor and a digital
display and can be controlled via a mobile app.
The digital display is intended for indoor use only. Do not use it outdoors. Contact with moisture
must be avoided under all circumstances. If you use the sensor outdoors, ensure that it is
protected from adverse weather, moisture and direct sunlight.
Using the product for purposes other than those described above may damage the product.
Improper product use can cause a short circuit, fire, electric shock or other hazards.
This product complies with statutory, national and European regulations. For safety and appro-
val purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product
available to third parties only together with the operating instructions.
All company and product names contained herein are trademarks of their respective owners.
All rights reserved.
2 Delivery content
Digital display
Outdoor sensor
Power adapter
Operating instructions
3 Latest product information
Download the latest product information at
www.conrad.com/downloads
or scan the QR code
shown. Follow the instructions on the website.
4 Explanation of symbols
The following symbols appear on the product/device or in the text:
The symbol warns of hazards that can lead to personal injury.
The symbol warns of dangerous voltage that can lead to personal injury by electric
shock.
5 Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling, we will assume no liability for any resulting personal injury
or damage to property. Such cases will invalidate the warranty/guarantee.
5.1 General information
This product is not a toy. Keep it out of the reach of children and pets.
Do not leave packaging material lying around carelessly. It may become a dangerous
plaything for children.
Should you have any questions or concerns after reading this document, please contact
our technical support or a professional technician.
Maintenance, modifications and repairs must be carried out by a technician or a specialist
repair centre.
5.2 Handling
Handle the product carefully. Impact, shocks or a fall even from a low height can damage
the product.
5.3 Operating conditions
Do not expose the product to any mechanical stress.
Protect the product from extreme temperatures, strong jolts, flammable gases, vapours,
and solvents.
Protect the product from high humidity and moisture.
The product must not be exposed to direct sunlight.
Never switch the device on immediately after taking it from a cold into a warm environment.
This may cause condensation to form, which can destroy the product. Allow the product to
reach room temperature before using it.
