Plant observation camera
Version 07/12
“Garden watch”
°
Item no. 86 00 45
Intended use
The product has an integrated camera which takes pictures automatically in an adjustable interval. This allows
for a long-term observation e.g. during the growth of a plant which is being photographed every hour.
The recording takes place via a UBS stick provided (4 GBytes) which can be inserted inside of the device.
This product complies with the applicable National and European requirements. We kindly request that the
user follow the operating instructions, maintain this condition and ensure safe operation!
All names of companies and products are the trademarks of the respective owner. All rights reserved.
Package Contents
• Camera
• Foot (consisting of several components) with ground stake
• USB stick (4 GByte)
• CD with software
• 4 batteries of type AA/Mignon
• Operating Instructions
Controls
1 Adjustable lens
2 Button to turn the device on/off
3 LEDs “batt. low”, “power” and “memory”
4 Setting position for macro photographs
5 Setting position for normal photos
6 Battery compartment cover
7 Screw thread for installation (on the bottom side)
8 USB port for USB stick
9 Rotary knob for adjustment of the photo time intervals
10 Battery compartment for 4 batteries (type AA/mignon)
Safety Instructions
The warranty will be void in the event of damage caused by failure to observe these safety
instructions! We do not assume any liability for any consequential damage!
We do not assume any liability for material and personal damage caused by improper use
or non-compliance with the safety instructions. The warranty will be void in such cases!
• The unauthorised conversion and/or modification of the product is inadmissible because of safety
and approval reasons (CE). Never dismantle the product. There are no serviceable or adjustable
parts inside the product.
• Maintenance, adjustment, or repair work should only be carried out by a specialist/
specialist workshop.
• The product is not a toy and must be kept out of the reach of children. The product contains
small parts, glass and batteries.
• The product is suitable for use in unprotected outdoor areas. Do not operate the product in, or
under water!
• Do not expose the product to direct sunlight for a long period. Overheating may damage the
product. Place the product in such a way that it is kept in the shade.
• Observe the statutory regulations relating to the use of the product. Do not use the product for the
surveillance of people, buildings and vehicles!
• Do not leave packing materials unattended. They may become dangerous playthings for chil-
dren.
• Handle the product with care; knocks, blows or even a fall from a low height can damage it.
O P E R A T I N G I N S T R U C T I O N S
www.conrad.com
Notes on batteries/rechargeable batteries
• Keep batteries/rechargeable batteries away from children.
• Check that the polarity is correct when inserting the batteries/rechargeable batteries (pay attention to plus
and minus!).
• Do not leave batteries/rechargeable batteries lying around; they could be swallowed by children or pets. If
swallowed, consult a doctor immediately.
• Leaking or damaged batteries/rechargeable batteries can, when in contact with the skin, cause acid burns,
therefore, use suitable protective gloves.
• Batteries/rechargeable batteries must not be short-circuited, opened or thrown into a fire. There is a risk of
explosion!
• Conventional batteries must not be recharged. Danger of explosion! Only charge rechargeable batteries that
are intended for this purpose; use a suitable battery charger.
• Never mix batteries and rechargeable batteries; do not mix batteries or rechargeable batteries with different
charges (e.g. full and half-full batteries). Always use four (rechargeable) batteries of the same
type/manufacturer to power the bird watching camera.
• For the safe and lasting use of the product, we recommend that only high-quality alkaline batteries be used.
☞
When using rechargeable batteries, expect a shorter running time due to the lower operating
voltage (Battery = 1.5 V/cell, rechargeable battery = 1.2 V/cell).
Rechargeable batteries are more temperature sensitive than normal batteries. At low tem-
peratures, rechargeable batteries have a very short operating time.
Inserting/replacing the batteries
Open the battery compartment by pressing together the locking clip at the bottom of the battery compartment
and removing the battery compartment lid.
Insert four batteries of type AA (mignon) with the correct polarity. You will find an appropriate diagram in the
battery compartment.
Following that, insert the USB stick in the corresponding plug-in place (8) inside the battery compartment.
Close the battery compartment.
☞
A battery replacement is required if the LED “batt. low” lights up or the camera cannot be turned on.
Inserting/removing the USB stick; reading data out on the PC
The camera must be turned off to insert or remove the USB stick. To do this, press the on/off button (2) until
the camera emits 3 beeps and the “power” LED goes out.
Open the battery compartment, remove the battery compartment lid (6).
Afterwards the USB stick can be inserted into the port (8); or removed from the port.
To read out the data on the USB stick connect it to your computer, plug it in a free USB port. The USB stick
e.g. is recognised from Windows as removable media drive.
Assembling the camera
At the bottom of the camera you will find a tripod socket. Here you can
attach the mounting foot. Alternatively, you can use it to mount the
camera on a stand.
Following that, attach the fold-away base.
The illustration on the right shows the camera with
mounting foot and fold-away base.
Depending on where you want to install the
camera, you can insert the corresponding amount
of the extension pipes included in the delivery and
at last, attach the ground stake; see illustration on
the left.
By means of the fold-away base the camera can
be pointed from above at the plant to be observed
in order to get a better overview.
