![background image](http://html1.mh-extra.com/html/conrad/dvp-702/dvp-702_owners-manual_2654306024.webp)
When ON is selected, the player will display multi-angle mark
on the screen if the disc has multi-angle shot.
Returning to default setting
All settings will revert to the original factory settings when
Read is selected.
P22.
Adjusting LCD Screen
Following these steps to adjust the LCD quality during playback or while paused,
1. Repeatedly press
MODE
on the screen panel to select the parameters listed in the
menu. You can change
BRIGHTNESS, CONTRAST, SHARPNESS, COLOR
and
TINT
.
2. Repeatedly press (or hold down)
UP
and
DOWN
to change the setting of the
parameter selected.
3. To reset the setting to its defaulted value, select
RESET
by repeatedly pressing
MODE
then press
UP
or
DOWN
to confirm.
Note: If no key is pressed in 9 seconds, the Menu disappears.