This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau
(www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, micro
¿
lming,
or the capture in electronic data processing systems require the prior written approval by the editor.
Reprinting, also in part, is prohibited. This publication represent the technical status at the time of
printing.
© Copyright 2014 by Conrad Electronic SE.
V2_1014_02-HK
Declaration of Conformity (DOC)
We, Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau, hereby declare that this product
conforms to the fundamental requirements and the other relevant regulations of the directive 1999/5/EC.
The Declaration of Conformity for this product can be found at www.conrad.com.
Disposal
a) Product
Electronic devices are recyclable waste and must not be disposed of in the household waste.
At the end of its service life, dispose of the product according to the relevant statutory regulations.
Remove any inserted batteries and dispose of them separately from the product.
b) Batteries
As the end user, you are required by law (Battery Ordinance) to return all used batteries; disposal of them in
the household waste is prohibited!
Contaminated batteries are labelled with this symbol to indicate that disposal in the domestic
waste is forbidden. The designations for the heavy metals involved are: Cd = Cadmium, Hg =
Mercury, Pb = Lead (name on batteries, e.g. below the trash icon on the left).
Used batteries can be returned to collection points in your municipality, our stores or wherever
batteries are sold.
<
ou thus ful
¿
l your statutory obligations and contribute to the protection of the environment.
Technical data
Operating voltage .................................................. 1x 3 V/DC button cell CR2032
Bluetooth
®
version ................................................. Bluetooth
®
Smart (BLE 4.0)
Battery life ............................................................. about 180 hours
Protection rating ................................................... IPX7
Transmission range ............................................... max. 2 metres (with no obstructions)
Operating conditions .............................................. -10 to +50 °C, 0 - 95 % RH
Storage conditions ................................................. -20 to +60 °C, 20 - 98 % RH
Dimensions (W x H x D) ........................................ 29 x 44 x 12 mm
Weight ................................................................... 10 g
Supported devices ................................................. Apple iOS mobile devices with iOS version 5.0 or above,
Android mobile devices with version 4.3 or above,
with Bluetooth
®
4.0
Recommended app ............................................... ALA COACH+ (Download on the Apple App Store or
Google Play)
d) Pairing the app and running sensor via Bluetooth
®
4.0
Bluetooth
®
version 4.0 is required for pairing. Bluetooth
®
version 4.0 must be supported.
1. Ensure that the Bluetooth
®
function on your mobile device is
switched on.
2. Bring the running sensor and the mobile device to within
10 cm of each other to ensure that the sensor is detected
accurately with the strongest signal.
3. Make sure that no other Bluetooth
®
sensors are active within
a 20 m radius.
4. Go to the settings in the ALA COACH+ app, add a new sensor
and then con
¿
rm your selection by tapping the menu option for
the corresponding sensor.
5. Shake the sensor up and down to simulate running.
6. ALA COACH+ recognises the sensor; con
¿
rm your selection
by tapping the menu option "Running sensor" to complete the
pairing process.
Consult the app operating instructions or software support for information on how to use ALA
COACH+.
e) Calibrating
You can calibrate the sensor, i.e. adjust it to your body and running circumstances in order to ensure that
training data is measured accurately. For example, stride length and height vary from runner to runner,
which would lead to different distance readings. Even after calibration, distance measurements may not be
exact because factors such as running technique, nature of the running surface and its gradient affect the
measurement readings.
1. In the ALA COACH+ app, go to the menu option
ĺ
Setting
ĺ
My Sensors
ĺ
Foot Pod
ĺ
Foot Pod Calibration
2. Choose a known distance, e.g. between two milestones,
street lamps etc. and complete this distance in the ALA
COACH+ calibration mode. The distance must be at least
400 m; 800 m is ideal.
3. Press “Start” and begin running to calibrate the running
sensor.
4. Press “Stop” when you have run the corresponding distance.
5. Press “Save” until “stride write OK” is displayed.
Maintenance and cleaning
• The product does not require maintenance except for occasional cleaning. Use a soft, antistatic and lint-
free cloth to clean the device.
• Do not use any abrasive or chemical cleaning materials.
• Check the optical sensor from time to time. Use a soft brush to remove dust particles from the sensor.
Troubleshooting
Problem
Possible cause
Suggested solution
The running sensor
does not connect to
the app.
Is the Bluetooth
®
function activated
on the mobile device?
Activate the Bluetooth
®
connection on
your mobile device under settings.
Is the correct Bluetooth
®
version
available?
Check the Bluetooth
®
version
installed.
Is the running sensor activated in the
ALA COACH+ app?
Activate the running sensor in the ALA
COACH+ app.
The transmitter and receiver are
more than 2 metres apart.
Bring the transmitter and receiver
within range.
Is the running sensor in standby
mode?
The running sensor switches
to standby mode when it is not
connected to the app. Walk about 20
steps or shake the sensor to wake
it up.
Is the battery in the running sensor
empty?
Replace the sensor battery with a
battery of the same type.
