![background image](http://html1.mh-extra.com/html/conrad/85-69-97/85-69-97_operating-instructions-manual_2654320018.webp)
18
7. Handling, Operation and Connection
The operating instructions and safety notes of the devices to be operated with this set must
be observed. Never connect any consumers above 150 watt. Switch off the power station
(with the “ON/OFF” switch (5)) before connecting or disconnecting a consumer. Connect an
external inverter (voltage transformer) to the “inverter output” (3) only.
Never short-circuit the battery contacts. This may cause sparks and explosions. Put the
“12V/24V” into the 12V position before connecting the solar panel to the power station.
a) Solar panel
• Fold out the solar panel and arrest the
bases. The alignment angle to the sun
can be adjusted.
• Place the solar panel so that the sun irra-
diation directly hits the solar cells.
☞
The solar panel can also be used for charging external lead accumulators (e.g. 12V, 18V or
24V lead accumulator) a connection cable with terminal clamps is included in the delivery.
Be sure to use the correct polarity (red = positive / black = negative). When charging an
external rechargeable battery, the power station must first be disconnected. The switch
“12V/24V” (9) (position 24V also applies for 18V lead accumulators) can be used to set the
voltage for the external rechargeable battery to be charged.
• When the solar cells convert light energy, the “Solar” status LED (C) flashes blue.
b)Alignment and Inclination
For the solar panel to operate at peak capacity, we recommend that you learn about suitable alignment
and inclination.
Best alignment (and thus best capacity) is achieved when sunlight meets the solar module surface at a
right angle.
Summary of Contents for 85 69 97
Page 43: ...43...