2.4 GHz Colour Camera with
Version 11/08
rechargeable battery
°
Item-No. 75 15 52
Intended use
This 2.4 GHz colour camera together with the corresponding 2.4 GHz radio receiver is for mount-
ing in, and protecting, secluded or critical areas (e.g. surveillance of stores, intercommunication
systems, entrances and so on).
The camera as well as the provided power supply unit are solely intended for operation in dry
indoor locations.
The picture and sound transmission to the receiver takes place wirelessly at a frequency of
2.4 GHz.
The power is supplied via the power supply unit (8 V/DC) provided. Additionally, the camera has
an integrated rechargeable lithium-ion battery.
Please bear in mind that it is prohibited by law to observe strangers with a camera without their
knowledge and consent.
Any use other than the intended use described above is not permitted and may harm the prod-
uct and result in short circuits, fire, electric shocks etc.
etc. The product must not be modified or converted. The
safety instructions of this manual must be observed at all times. Please read the operating man-
ual carefully and keep it for later
reference.
Product contents
• 2.4 GHz camera
• Mounting base
• Installation material
• Power supply unit
• Operating instructions
Symbols
Ꮨ
A lightning-bolt symbol in a triangle indicates a health hazard, e.g. danger of elec-
tric shock.
This icon with an exclamation mark in a triangle indicates particular dangers asso-
ciated with handling, function or operation.
☞
The “Hand” symbol indicates special tips and operating information.
Safety instructions
The warranty will be void for damage arising from non-compliance with these
operating instructions! We do not assume any liability for material and per-
sonal damage caused by improper use or non-compliance with the safety
instructions!
The exclamation mark indicates important information in these operating
instructions that should always be observed.
• The camera must not be modified or converted, as not only the CE certifi-
cation will become void but also the warranty.
• The camera should not be exposed to extreme temperatures, direct sun-
light, intense vibration or heavy mechanical stress.
• Where the devices are used connected to other devices e.g. a television
screen, the operating instructions and safety notices of the devices con-
nected must be followed.
• The use of the surveillance camera system does not replace the personal
supervision of children, or people who require special assistance, but only
serves as a support to this supervision.
• The internal lithium-ion battery may only be recharged with the provided
power supply unit.
• This camera system uses and generates high frequency energy. If the
device is not installed and operated in accordance with these instructions,
it can cause radio interference. If the wireless camera system causes inter-
ference to other equipment, try one or more of the following measures list-
ed below, in order to restore normal operation:
- Change the position of the camera.
- Increase the distance between the device affected and the radio camera
or the receiver for the radio camera system.
- Select another transmission channel.
• After rapid changes in temperature, the camera requires approx. 15 to sta-
bilise, in order to adjust to the surrounding temperature, before it can be
used.
Wait until the product reached room temperature, before commissioning.
• Electronic devices are not toys and should be kept out of the reach of chil-
dren!
• The provided power supply unit conforms to protection class II. It may only
be plugged into a standard household 230V~/50Hz mains socket.
Ꮨ
O P E R A T I N G I N S T R U C T I O N S
www.conrad.com
• Please contact a qualified person if you are unsure about the safety and
correct use of the system components.
• Never allow the packaging material to lie around unattended. Plastic
film/bags etc. can be dangerous toys for children, there is a risk of suffoca-
tion.
• If you have reason to assume that safe operation is no longer possible, dis-
connect the device immediately and secure it against inadvertent operation.
• The power supply unit may never be plugged in or out with wet hands.
• Never pull the power cable; only unplug it at the power outlet.
• In the event of a thunderstorm, unplug the power supply unit for safety rea-
sons.
• It can be assumed that safe operation is no longer possible if:
- the device is visibly damaged,
- the device no longer operates and
- the device was stored under unfavourable conditions for a long
period of time or
- it has been subjected to considerable stress during transportation.
• In commercial institutions, the accident prevention regulations of the
Employer’s Liability Insurance Association for Electrical Systems and
Operating Materials have to be observed.
• The provided camera and the power supply unit must not become damp or
wet. The product is approved only for use in dry rooms.
• Maintenance, adjustment and repair may only be carried out by a qualified
specialist or a specialised repair shop.
For any unanswered questions please contact our customer service or other
specialists.
General notes about batteries
• Keep batteries out of reach of children.
• Do not leave the batteries lying around openly; there is a risk of them being swallowed by chil-
dren or domestic animals. If swallowed, consult a doctor immediately.
• If your skin comes into contact with leaking or damaged batteries, you may suffer burns. For
this reason you should use suitable protective gloves.
• Make sure that the batteries are not short-circuited, taken to pieces or thrown into a fire. There
is a risk of explosion!
• Do not recharge normal batteries. There is a risk of explosion! Only charge rechargeable bat-
teries which are intended for this purpose; use a suitable battery charger.
• Old batteries/rechargeable batteries can leak and cause damage to the product; loss of guar-
antee/warranty!
• For the environmentally-friendly disposal of batteries and rechargeable batteries, please read
the chapter “Disposal of used batteries/rechargeable batteries”.
Product description
Side view
1) Antenna
2) Screw thread
3) Locking screw
Rear view
4) Status LED “Charge” (red)
5) DC IN 5V
6) Status LED “Power” (green)
7) Adjuster
Front view
8) IR LEDs
9) Camera lens
10) Photo sensor
The camera has IR LEDs for illumination in darkness. Please observe that in darkness
the image is monochrome. Furthermore, there is an opening at the lower left front - it
contains the microphone
8
9
10
Power
Charge
4
2
3
1
O
FF
DC5V
4
5
6
7
Ꮨ
